Published chassis reference
MY2027 Canadian XL8. The brochure’s wheelbase graphic contains overlapping dimension sets. Wheelbase and cab-to-axle values are withheld from this sheet until matched to an unambiguous body-builder drawing; the printed rating-specific 281-inch reference is retained only in its rating note.
| Specification | Published value | Metric / configuration note |
|---|---|---|
| GVWR range | 53,200–54,000 lb | 24,131–24,493 kgBrochure assigns the lower value to its 281-inch-wheelbase configuration. |
| Axle arrangement | 6×4 tandem | See reference scope |
| Engine | Cummins L9 | See reference scope |
| Published ratings | 300 or 360 hp | 860 or 1,150 lb-ft; confirm the ordered engine rating. |
| Transmission | Allison 3000 RDS | 6-speed automatic. |
| Rear axle rating | 40,000 lb | 18,143 kg |
| Brakes | Full air with ABS | See reference scope |
Source: Hino Canada — 2027 XL Series brochure, pages 2–3. Manufacturer metric values are retained; metric equivalents of inch-only wheelbase options are calculated at 25.4 mm per inch and rounded.
Use this sheet for the right configuration
Write down the full job: material carried, density, loading method, terrain, operating hours and any stationary equipment. The body supplier should confirm installation space and axle loading for the selected chassis. Do not assume that a Class 8 badge makes every build a highway tractor or heavy-haul combination.
Confirm the finished truck
Measure the installed body and equipped vehicle, obtain axle scale weights and check the VIN-linked labels and body-builder records. No finished payload, universal towing capacity or interchangeable body approval is inferred from these reference figures.
Body fit and payload planningSources and reference scope
Reviewed September 9, 2026. Manufacturer facts are tied to the edition below; inspection and purchase-planning questions are editorial guidance.
Canadian MY2027 XL8 6×4. The wheelbase graphic contains overlapping values; it is not used here as a dimension authority.
Canadian XL8 application and Cummins L9 / Allison 3000 RDS context.
Select the truck model year and conventional or cab-over chassis before using installation drawings.